Top 6 Super Hacks on How to Clean Your House with Vinegar and Baking Soda

This post may contain affiliate links. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you.

How to clean your house with Vinegar and Baking Soda? In this article we will discuss 6 super hacks on how to clean your house with vinegar and baking soda.

By mixing baking soda with vinegar you get a cleaning product that is as effective as those on the market! With the aim of protecting the environment and health, millions of people have opted for ecological cleaning. These products, unlike those sold on the market, do not contain aggressive chemicals.

Although the industry has made people believe that they have the best products to facilitate household chores, in reality, there are various alternatives based on natural ingredients, which have similar effects but without polluting.

Above all, they are economical and easy-to-use solutions, which can be used at home on multiple surfaces. Among the main ecological cleaning products, sodium baking soda and vinegar stand out, thanks to their properties, disinfect, remove stains and eliminate grease!

Why not try them? Let’s see 6 solutions for cleaning with baking soda and vinegar.

How to clean your house with vinegar and baking soda

See below six ways you can use vinegar and baking soda to clean your house:


How to clean your house with vinegar and baking soda

The antibacterial compounds of sodium bicarbonate and vinegar are ideal for disinfecting all surfaces in the bathroom. In fact, they remove the remains of soap, mold and other residues that accumulate in the toilet, tub and sink.


  • 2 tablespoons of baking soda (20 g);
  • 1/4 cup of white vinegar (60 ml);
  • 2 cups of water (500 ml);


Pour the water into a bucket and add the baking soda and vinegar. Then wait for the effervescent reaction that is created to pass, then use the liquid to clean the bathroom. Finally, rub with a toothbrush (or sponge), leaving it to act for 10 minutes and rinse at the end.


The main allies to clean the microwave oven naturally are vinegar, lemon and baking soda.


  • Bowl of water;
  • 1 glass of vinegar;
  • 2 tablespoons of baking soda or 1/2 lemon cut.


By heating the bowl with the other ingredients to the maximum temperature for 5 minutes, steam with intense degreasing and sanitizing properties is released which allows you to clean the internal surfaces of the microwave simply with a wet sponge. To get the best result, once the timer has sounded, you need to be careful to wait 3/4 minutes before opening the oven and you need to rinse and dry with a cloth or microfiber cloth. Finally, the turntable can be washed with water and vinegar or using a DIY surfactant-free product.

Cleaning the microwave with vinegar:

First, you need to remove the turntable and wash it by hand (with dish soap and rinsing with vinegar) or in the dishwasher, then you need to put a glass full of water in the oven in which 4/5 have been poured. spoons of white wine vinegar and turn it on at maximum temperature for 5 minutes. Once the timer has sounded, it is necessary to wait a couple of minutes, so that the steam settles on the surfaces, and then it is possible to clean the walls and bottom with a sponge, in order to remove all the grease. Once this has been done, it is necessary to rinse with water and dry with a microfibre cloth.

Cleaning the microwave with baking soda:

In case you need to eliminate encrusted residues, you can make a paste with three parts of baking soda and one of water. Then rub it on the surfaces and then rinse and dry with a soft cloth.

Also read: 6 Best Ways on How to Clean your House without Chemicals


Cleaning the washing machine is essential, both for its aesthetics and to make it last longer over the years. First of all, you need a mixture to clean the outside of the washing machine and the door, here is what you need:


  • 1 tablespoon of liquid castile soap;
  • 100 ml of white vinegar;
  • 500 ml of water;
  • 4 drops of lemon essential oil;
  • 1 tablespoon of baking soda;


Pour all the ingredients into a spray, shake well and spray on the surfaces of the appliance, wipe with a damp sponge and you’re done!


Even mold can be cleaned with baking soda and vinegar which, as already mentioned, are among the most used products for the natural cleaning of the house, thanks to the numerous disinfectant properties.


  • 200 ml of water;
  • 100 ml of vinegar;
  • 1 tablespoon of baking soda;
  • A few drops of lemon oil;
  • A few drops of lavender oil.


Start by dissolving the baking soda in water and, only afterward, add the vinegar and scented oils. Use the cleaning solution inside a spray bottle and spray it on the surfaces affected by mold, leaving it to act for an hour, without rinsing. This natural product on how to remove mold from walls has antibacterial, whitening and disinfectant properties and delicately eliminates all mold residues, favoring the detachment from the walls, without damaging them. This remedy can also be used periodically on risk areas to prevent new spots from forming.


Every time you empty the dustbin, rinse it with hot water, helping yourself with a sponge dedicated to this operation: in this way, you will eliminate the residues of dirt.


  • 1/2 liter of water;
  • 1 glass of vinegar;
  • 3 drops of tea tree oil


Dip the sponge in the mixture and wash the bin: without forgetting the lid and the outside as well. Then pour in all the solution and let it act for at least 5 minutes. Finally rinse, allowing to air dry.

After cleaning there are some remedies you can use to get rid of unpleasant odors. Before inserting the new bag, put a couple of tablespoons of baking soda on the bottom of the bin and in the bag: thanks to its absorbent power it will prevent the formation of bad odors. For persistent bad smells, however, a solution with water and bicarbonate can be created: shake and spray in the dustbin.


Limestone, as we know, is the enemy of all showers. To thoroughly clean the showerhead, especially if the limescale layer is such as to make it difficult to remove, the advice is to disassemble the dispenser. Generally, it is sufficient to unscrew the showerhead from the tube but for some models, a different intervention may be necessary.

Ingredients and procedure:

Get a basin large enough so that the showerhead can be completely immersed and pour half the water and the remaining half of the white vinegar into it. If the deposits are particularly difficult, it is possible to use hot water but at a temperature that is not excessively high in order not to risk damaging the plastic parts and the gaskets.

Then add a dose of bicarbonate. The right dosage is about 70 grams of bicarbonate for every 240 ml of white wine vinegar. An effervescent reaction should occur when adding baking soda, this is normal. Immerse the showerhead in the basin and let it soak for at least an hour. In fact, to ensure a perfect result, the ideal would be to let it soak all night. Once the necessary time has elapsed, limescale will begin to peel off the soaking surfaces.

Wash the showerhead under running water from the sink, rinsing it thoroughly to remove any residual trace of limestone but also of vinegar and baking soda.

To better remove any residual encrustations, we recommend using an old toothbrush and then a cloth. At this point, the showerhead can be reassembled, by running a little water before using it to take a shower, to completely eliminate any last residues of dirt or vinegar.

So there you have it: six ways on how to clean your house with vinegar and baking soda.

No Comments Yet

Leave a Reply

Your email address will not be published.